Funding

EU taxonomy and lighting control: activities 7.3, 7.5 and 7.7

Updated 18 November 20266 min readSensMotion editorial team
In shortThe EU taxonomy names lighting control explicitly: activity 7.5 covers, among other things, occupancy and daylight sensing and lighting control systems, and activity 7.3 the installation of energy-efficient light sources, both as enabling activities. For owners of large non-residential buildings above 290 kW, activity 7.7 also matters, as it requires efficient operation through monitoring. After the Omnibus, CSRD reporting only applies to companies with more than 1,000 employees and more than €450m turnover.
At a glance
Activity 7.5
sensing equipment incl. motion and daylight control, lighting control systems (Annex I, Delegated Regulation (EU) 2021/2139)
Activity 7.3
installation and replacement of energy-efficient light sources (Annex I, section 7.3 point (d))
Activity 7.7
buildings before 2021 with EPC class A or top 15 %, above 290 kW also monitoring (Annex I, section 7.7)
CSRD after the Omnibus
more than 1,000 employees and more than €450m turnover (Directive (EU) 2026/470)
Transposition of the Omnibus
by 19 March 2027 (Directive (EU) 2026/470)

What is the EU taxonomy and who does it affect?

The Taxonomy Regulation (EU) 2020/852 is a classification system that defines when an economic activity counts as environmentally sustainable. The technical criteria for climate change mitigation are set out in Annex I to Delegated Regulation (EU) 2021/2139. For buildings, sections 7.1 to 7.7 are the relevant ones.

The key distinction is between taxonomy-eligible and taxonomy-aligned. An activity is eligible if it is described in the catalogue. It is aligned only once it meets the substantial contribution criteria, does no significant harm to the other environmental objectives (DNSH) and complies with minimum safeguards.

The taxonomy does not require anyone to install lighting control. It works through reporting duties and through financing, where banks and investors ask for taxonomy data. In Germany, a legal duty to install follows from Section 56(6) of the GModG (German Building Modernisation Act, Gebäudemodernisierungsgesetz), see Section 56(6) GModG.

Activity 7.5: where lighting control is named explicitly

Activity 7.5 covers the installation, maintenance and repair of instruments and devices for measuring, regulating and controlling the energy performance of buildings. In summary, it includes:

  • zoned thermostats, smart thermostat systems and sensing equipment, including motion and daylight control,
  • building automation and control systems, building energy management systems, lighting control systems and energy management systems,
  • smart meters for gas, heat, cooling and electricity,
  • façade and roofing elements with a solar shading or solar control function.

7.5 is an enabling activity. For DNSH, the annex lists only climate change adaptation (Appendix A) for 7.5; the other objectives are marked "N/A". Activity 7.5 does not require new luminaires. In our reading of the text, retrofitting controls to existing dimmable LED luminaires falls under sensing equipment or lighting control systems, see retrofitting lighting control.

Who reports the activity depends on the role: the installer reports its turnover, the building owner its investment. Under a common reading of the disclosure rules, companies can report investment in such individual measures on their own buildings as taxonomy-aligned capital expenditure (CapEx) if the criteria are met. Check this with your auditor.

Activity 7.3: efficient light sources

Activity 7.3 covers individual measures involving energy efficiency equipment, including the installation and replacement of energy-efficient light sources. The measures must comply with national minimum requirements implementing the buildings directive and, where applicable, be rated in the two highest populated energy efficiency classes under the Energy Labelling Regulation (EU) 2017/1369. 7.3 is also an enabling activity.

In practice, replacing fluorescent tubes with LED can fall under 7.3, while controlling those LEDs falls under 7.5. Both can be documented separately.

Activity 7.7: what owners of large non-residential buildings must show

Activity 7.7 covers the acquisition and ownership of buildings. For buildings built before 31 December 2020, it requires at least an EPC (energy performance certificate) of class A or, alternatively, a place in the top 15 % of the national or regional stock by operational primary energy demand. Newer buildings must meet the new-build criteria (7.1).

For large non-residential buildings with heating, air-conditioning or combined systems above 290 kW, there is an additional requirement: the building must be efficiently operated through energy performance monitoring and assessment. A footnote gives an energy performance contract or a building automation and control system under the former buildings directive as examples. In Germany, the equivalent today is building automation under Section 56(1) GModG.

An obvious objection: lighting control alone does not make a building taxonomy-aligned. That is correct. It does, however, reduce primary energy demand, which includes lighting for non-residential buildings, and its monitoring data supports evidence of efficient operation. From 1 January 2027, the German GModG introduces efficiency classes A to G for non-residential certificates, with class A reserved for zero-emission buildings. Our assessment: for existing German buildings, the top 15 % route is therefore likely to matter more in practice, see energy certificates from 2027.

What has the Omnibus changed for the CSRD?

With Directive (EU) 2026/470 (Omnibus I), the EU has narrowed the scope of the CSRD considerably. Reporting now applies only to companies with an average of more than 1,000 employees and more than €450m net turnover. Member States must transpose this by 19 March 2027. Because taxonomy disclosure under Article 8 of the Taxonomy Regulation is linked to the CSRD duty, fewer companies will have to report taxonomy figures.

For smaller companies, the taxonomy still matters: banks, investors and large tenants request data for their own reports and green financing. In addition, the Commission put a revision of the criteria for building activities out to consultation in 2026. To our knowledge, the criteria described here still apply as of November 2026.

This article is neither legal nor financial advice. The regulation texts and the assessment of your auditor or financing partner are authoritative. As of November 2026.

What data should you document?

Whether you report yourself or supply data to a lender, the evidence is similar:

  • installed load and luminaire type per zone, with energy efficiency class for 7.3,
  • a zoning plan with sensors and control functions, as evidence of sensing and lighting control for 7.5,
  • consumption per zone before and after the retrofit over the same reference period, net of the sensors' own consumption,
  • invoices with investment shown separately for each activity,
  • for buildings above 290 kW, ongoing monitoring data as evidence of efficient operation.

Monitoring is included in every SensMotion project. The AU-Manager provides consumption data per zone and passes it to the building automation system via BACnet/IP. How to evidence savings properly is covered in calculating and verifying savings.

Frequently asked questions

Is lighting control automatically taxonomy-aligned?

No. It is eligible under 7.5. It becomes aligned only once the criteria, including DNSH and minimum safeguards, are met and documented.

Do I need new LED luminaires for 7.5?

No. 7.5 covers sensing equipment and lighting control systems, independent of any luminaire replacement. Replacing luminaires can additionally fall under 7.3.

Does my company still have to report after the Omnibus?

Under Directive (EU) 2026/470, only if it has more than 1,000 employees and more than €450m net turnover. The national transposition, due by 19 March 2027, is decisive.

What does the 290 kW criterion in 7.7 mean?

Large non-residential buildings with systems above 290 kW must also be efficiently operated through energy performance monitoring and assessment. The regulation gives an energy performance contract or building automation as examples of evidence.

Does the taxonomy help with funding?

The taxonomy is not a funding programme, but it can influence the terms of green financing. For German grants, see funding 2026.

Last reviewed: 18 November 2026. General information, not legal advice. The legal text is authoritative.

Getting started

From your question to a finished plan.

Free initial consultation, one contact person.

Send a photo of the driver labelWe check free of charge whether your luminaires can be retrofitted.
Add your floor planWe turn it into a 3D model with sensors and zones.
Planning and quoteYou see the result in 3D first, then you decide.