Cold storage

Keep the cold. Light only when needed.

Cold rooms are rarely occupied, yet the lights often stay on continuously. Unnecessary light there usually costs twice: electricity for the luminaires and heat that the refrigeration plant has to remove again.

What § 56 means here

Cold stores are non-residential buildings. Under Germany's GModG, if the building has a heating or air-conditioning system, including combined ventilation, above 70 kW, it needs automatic lighting control by 31 December 2029, as a rule zoned and with occupancy detection.

Whether the refrigeration plant for the goods counts is a case-by-case question, because energy for production processes is outside the scope of the act under § 2(1) GModG. Offices, dispatch and picking areas with their own systems are often decisive. We check this with you using the plant data.

How we plan your cold store

Chilled and frozen rooms switch by occupancy: when a forklift enters the aisle the light comes up, then returns to background level or switches off. Doors, airlocks and loading docks get their own zones with longer hold times.

According to the datasheets, the sensors are rated for ambient temperatures down to −30 °C. In halls of 6 to 12 m we use the IP66 high-bay sensor; in lower rooms, microwave sensors inside suitable luminaires. Below that temperature, for example in blast freezing, we assess each application separately.

Typical zones

  • Chilled and frozen rooms
  • Racking aisles in the freezer store
  • Doors and airlocks
  • Loading docks and dispatch
  • Picking and buffer areas

Frequently asked questions

Do the sensors work in a freezer store?

The manufacturer rates the sensors for −30 °C to 55 °C. That covers many freezer warehouses. For lower temperatures and for areas with condensation at doors, we check protection rating and mounting position case by case.

Does less light also save refrigeration energy?

As a rule, yes. The luminaires' power is released as heat in the cold room and has to be removed by the refrigeration plant. How large this effect is depends on the plant and operation. Monitoring verifies the lighting savings per zone.

Where does the controller go?

The AU-Manager is rated for 10 to 40 °C and indoor use, so it sits in the office or plant room. Sensors in the cold room connect wirelessly; we check the radio path through the insulated panel walls beforehand.

Getting started

From your question to a finished plan.

Free initial consultation, one contact person.

Send a photo of the driver labelWe check free of charge whether your luminaires can be retrofitted.
Add your floor planWe turn it into a 3D model with sensors and zones.
Planning and quoteYou see the result in 3D first, then you decide.