Warehouse & logistics

Light for the forklift, not for empty aisles.

In warehouses the lights often run around the clock, although most aisles are empty most of the time. This is where lighting control saves the most.

What § 56 means here

Logistics halls often have large heating or ventilation systems. If a system exceeds 70 kW, the hall needs automatic lighting control by 31 December 2029, as a rule with zoning and occupancy detection.

You usually don't need new high-bays for this. We retrofit your existing LED luminaires with sensors.

How we plan your hall

Every racking aisle becomes its own zone. Sensors are placed so that the light comes up ahead of the forklift, not once it's already in the aisle.

Empty aisles stay at background level or switch off. Traffic routes and gates get their own zones with longer hold times.

Typical zones

  • Individual racking aisles
  • Main traffic routes and junctions
  • Gates and loading docks
  • Picking and packing stations
  • Daylight zones along rooflights

Frequently asked questions

Does this work in high-bay warehouses?

Yes. For mounting heights of 6 to 15 m we use high-bay sensors with the right lens. In the 3D planning we check every aisle against the manufacturers' detection diagrams.

Will the light go off while someone works in the aisle?

Not if it's planned properly. We set hold times and background light to match your processes, with longer hold times in picking aisles.

Do we need to stop operations?

No. Sensors are mounted on the luminaires and connect wirelessly. Installation proceeds section by section during operation.

Getting started

From your question to a finished plan.

Free initial consultation, one contact person.

Send a photo of the driver labelWe check free of charge whether your luminaires can be retrofitted.
Add your floor planWe turn it into a 3D model with sensors and zones.
Planning and quoteYou see the result in 3D first, then you decide.