
Halls & warehouses
EFS106
High-Bay Sensor with AUX Interface (12 V DC). Compact high-bay sensor for luminaires with a 12 V AUX output. Detects people and forklifts in aisles and halls up to 12 m.
- Plug-and-play with pre-installed sensor connector
- Bluetooth mesh networking technology
- For mounting heights between 6 m and 12 m
- AlgoH2 algorithm for high ceilings
- Integrated analogue PIR sensor
- Interchangeable lenses
- 12 V DC input
- Daylight harvesting
Technical data
| Input voltage | 12 V DC |
|---|---|
| Power consumption | max. 50 mA, 0.6 W |
| Wireless | Bluetooth 5.0 (BLE up to 100 m), 2.4 GHz |
| Sensing | PIR + daylight |
| Mounting height | 6–12 m (20–40 ft) |
| Temperature range | −30 °C to 55 °C |
| Ingress protection | IP40 |
| Housing | Flame-retardant plastic (class 5VA), white |
| Standards | CE, RoHS (EU Directive 2011/65/EU) |
| Dimming output | 0-10 V (Class 2), max. 10 mA |
| Driver requirement | Dim-to-off LED driver with 12 V AUX output |
| Detection range | 12–24 m (40–80 ft) |
| Installation | SC01 in 1/2-inch knockout; side mounting with SC03 |
| Commissioning | Reset 3 s (blue LED flashes), then via the Keilton+autani app |
Where we use it
For high-bay luminaires with a 12 V auxiliary output. In racking aisles we place the sensors so that the light runs ahead of the forklift.
Typical applications: Warehouses and high-bay storage, Production halls, Logistics centres, Sports halls, Railway stations and transport hubs
Manufacturer data. Which components make sense in your building is decided in the 3D planning. Occupancy detection, zoning and monitoring are included with every sensor.
Getting started
From your question to a finished plan.
Free initial consultation, one contact person.
Send a photo of the driver labelWe check free of charge whether your luminaires can be retrofitted.
Add your floor planWe turn it into a 3D model with sensors and zones.
Planning and quoteYou see the result in 3D first, then you decide.