Schools & sports halls

Light for lessons, not for empty rooms.

Classrooms stand empty after school, in free periods and during the holidays. Corridors and halls are often used by only a few people in the evening. Control by occupancy and daylight adapts the light to that.

What § 56 means here

Schools and sports halls are non-residential buildings and are usually heated centrally. Under Germany's GModG, if that system exceeds 70 kW, the building needs automatic lighting control by 31 December 2029, as a rule zoned and with occupancy detection. The owner is responsible, which for public schools is usually the local authority or school body.

For public buildings, the GModG also sets out an exemplary role for the public sector (§ 4). Lighting control with verifiable results is a visible part of that.

How we plan your school

In classrooms, luminaire sensors control by presence and daylight, with the window row dimming first. A wireless wall switch at the board allows scenes, for example for presentations. Corridors dim to background level outside break times.

In sports halls we use high-bay sensors for mounting heights of 6 to 15 m. We check ball impact resistance with the existing luminaire. For club sports in the evening, schedules and presence work together, and empty hall sections stay off.

Typical zones

  • Classrooms and specialist rooms
  • Window zones with daylight
  • Corridors and stairwells
  • Sports hall by section
  • Changing rooms and washrooms

Frequently asked questions

Will the light suddenly go off during a lesson?

Not if it's planned properly. We choose sensors and hold times to suit the room. When people are present, the required illuminance is reached; what is controlled is absence and daylight.

What happens in the evenings and holidays?

Schedules define when areas may switch on at all. For evening use by clubs or courses, the rooms in use stay active while the rest stays off or at background level.

Can we compare several schools?

Yes. Monitoring shows consumption and operating hours per building and zone. School bodies can see where control delivers the most and where settings should be adjusted.

Getting started

From your question to a finished plan.

Free initial consultation, one contact person.

Send a photo of the driver labelWe check free of charge whether your luminaires can be retrofitted.
Add your floor planWe turn it into a 3D model with sensors and zones.
Planning and quoteYou see the result in 3D first, then you decide.