
Halls & warehouses
EFS106W
Rugged IP66 High-Bay Sensor with AUX Interface. The rugged IP66 version for wet areas, cold zones, wash bays and covered outdoor areas.
- PIR with AlgoH2 for 6 to 12 m mounting height
- Photocell for Hold-ON/OFF operation
- Interchangeable lenses
- IP66 rated – for damp environments and outdoor use
- UV-resistant nylon housing (black)
- Long-range antenna, Bluetooth up to 100 m
Technical data
| Input voltage | 12 V DC |
|---|---|
| Power consumption | max. 50 mA, 0.6 W |
| Wireless | Bluetooth 5.0 (BLE up to 100 m), 2.4 GHz |
| Sensing | PIR + photocell (Hold ON/OFF, no daylight control) |
| Mounting height | 6–12 m (20–40 ft) |
| Temperature range | −30 °C to 55 °C |
| Ingress protection | IP66 |
| Housing | Flame-retardant plastic (class 5VA), black, UV-resistant |
| Standards | CE, RoHS (EU Directive 2011/65/EU) |
| Dimming output | 0-10 V (Class 2), max. 10 mA |
| Driver requirement | Dim-to-off LED driver with 12 V AUX output |
| Detection range | 12–24 m (40–80 ft) |
| Installation | WSC01 in 1/2-inch knockout; side mounting with WSC03 |
Where we use it
Wherever moisture, dust or weather are present: cold stores, loading docks, wash bays, canopies.
Typical applications: Outdoor lighting, car parks, Damp locations, car washes, Cold stores and loading docks, Warehouses and high-bay storage, Production halls, Logistics centres
Manufacturer data. Which components make sense in your building is decided in the 3D planning. Occupancy detection, zoning and monitoring are included with every sensor.
Getting started
From your question to a finished plan.
Free initial consultation, one contact person.
Send a photo of the driver labelWe check free of charge whether your luminaires can be retrofitted.
Add your floor planWe turn it into a 3D model with sensors and zones.
Planning and quoteYou see the result in 3D first, then you decide.