Technology & planning

Fluorescent tube ban in the EU: what building owners should plan

Updated 18 November 20266 min readSensMotion editorial team
In shortSince the RoHS exemptions expired, standard T5 and T8 fluorescent lamps (deadline 24 August 2023) as well as T2, T12 and single-capped compact fluorescent lamps (deadline 24 February 2023) may no longer be placed on the EU market. Existing lamps may still be operated and remaining stock may be sold off. If you switch to LED, plan presence and daylight sensors at the same time: in Germany, Section 56(6) GModG requires automatic lighting control by 31 December 2029 for buildings above 70 kW.
At a glance
T5 and T8 (standard tri-band)
exemption expired on 24 Aug 2023 (Delegated Directive (EU) 2022/284)
T2, T12 and long-life lamps
expired on 24 Feb 2023 (Delegated Directive (EU) 2022/284)
Single-capped compact fluorescent lamps
expired on 24 Feb 2023 (Delegated Directive (EU) 2022/276)
Banned
placing on the market; operation and sale of remaining stock remain allowed (RoHS Directive 2011/65/EU)
Lighting control in Germany
by 31 Dec 2029 for non-residential buildings above 70 kW (Section 56(6) GModG)

What exactly is banned?

The RoHS Directive 2011/65/EU restricts hazardous substances in electrical and electronic equipment, including mercury. Fluorescent lamps need mercury to produce light and were therefore permitted through exemptions in Annex III of the directive. With Delegated Directives (EU) 2022/284 and 2022/276, these exemptions expired for the common types.

It matters what the ban covers: it applies to placing on the market, meaning making new products available on the EU market for the first time. It is not a ban on use.

  • Allowed: continuing to operate existing fluorescent lamps, using up your own stock, retailers selling remaining stock.
  • No longer allowed: placing new products of the affected types on the EU market.

Special-purpose lamps may be subject to different rules. If in doubt, check the lamp type against the manufacturer's information.

What does this mean for owners and operators?

In the short term, nothing changes in operation. In the medium term, replacements become scarcer: remaining stock is finite, the choice narrows and prices may rise. In halls, every lamp change also means a mobile elevating work platform and often an interruption to operations.

This calls for planning rather than emergency action:

  • Record the installed base: lamp types, quantities, ballasts, age of luminaires and operating hours per area.
  • Set priorities: convert areas with long operating hours and hard-to-reach luminaires first.
  • Secure replacements until conversion: estimate realistically how many lamps will fail in the meantime.
  • Plan the conversion together with controls: one access to the ceiling, one project, one verification.

Why is the conversion the right time for sensors?

For non-residential buildings with a heating, air-conditioning or combined system above 70 kW, the GModG (German Building Modernisation Act, Gebäudemodernisierungsgesetz) requires automatic lighting control by 31 December 2029. It should be appropriately zoned and include occupancy detection. The details are explained in the article on Section 56(6) GModG. If you only replace lamps now, you may have to open the ceiling a second time before 2030.

The energy balance points the same way. From 1 January 2027, the German reference building is calculated with LEDs in LED luminaires and with presence and daylight control in specified zones. This benchmark determines the efficiency class in the energy certificate and, from 2030, the minimum energy performance under Section 40. LED alone does not reach that level in the zones concerned.

Economically, the two belong together as well. LED lowers the load, controls lower the operating hours. The effects are multiplied rather than added, as shown in calculating and verifying savings.

One objection is that the LED conversion alone already delivers the big saving. That is true for the first step. Controls, however, address what LED does not change: the hours in which lights are on although nobody is there or there is enough daylight.

LED retrofit tube or new luminaire?

There are two routes. Which one fits depends on the condition of the luminaires and on the controls you plan.

CriterionLED retrofit tube in existing luminaireNew LED luminaire or LED module with driver
Effortlow, often swapping the tube and possibly the starterhigher, luminaire replacement or conversion
Dimmabilityusually none or limitedwith a dimmable driver (DALI or 0-10 V)
Suitability for presence and daylight controllimitedgood
Optics and light distributiondictated by the old luminairedesigned for LED
Conformitycheck carefully if the luminaire is rewiredmanufacturer responsible for the new luminaire

Retrofit tubes exist for luminaires with conventional ballasts, for certain electronic ballasts and for direct mains operation with rewiring. Rewiring a luminaire modifies a tested product, and responsibility for its safety may then shift to whoever carried out the conversion. Have such work done and documented by a qualified electrician.

For lighting control, the dimmable driver is decisive. Without dimming, only on and off remain, and background lighting during absence or daylight control are hardly feasible. If you are buying new luminaires anyway, choose drivers with DALI or 0-10 V. Existing dimmable LED luminaires can be retrofitted without new control cables, see retrofitting lighting control with existing luminaires. Which technology suits your building is compared in DALI, KNX or wireless.

What applies in Austria and Switzerland?

In Austria, the EU RoHS Directive applies as in all member states, with the same deadlines. In Switzerland, the Federal Office for the Environment (FOEN/BAFU) aligned Annex 2.18 of the Chemical Risk Reduction Ordinance (ChemRRV/ORRChem) with EU developments on 28 October 2022, with effect from 1 December 2022. According to the FOEN, this covers among others linear T2, T5 and T8 fluorescent lamps and most single-capped compact fluorescent lamps. Please check the Swiss ordinance for the exact deadlines and transitional rules.

How should you approach the conversion?

  • Survey the installation: lamp types, load, operating hours and existing controls.
  • Check the obligation: if a system exceeds 70 kW, the 31 December 2029 deadline applies in Germany.
  • Decide between new luminaire and retrofit, with dimmable drivers in mind.
  • Plan the sensors: zones, detection areas, background lighting and hold times. SensMotion plans this in 3D beforehand and retrofits wirelessly.
  • Measure consumption before and after so the savings can be verified.
  • Dispose of old lamps separately: fluorescent lamps contain mercury and belong in the collection system for waste electrical equipment.
This article is not legal advice; the legal texts are authoritative. Information on Austria and Switzerland is provided without guarantee, as of November 2026.

Frequently asked questions

Do I have to replace my fluorescent tubes now?

No. The ban covers placing new lamps on the market, not their operation. You may keep using existing lamps and buy remaining stock while it lasts. You should still plan the conversion, because replacements are becoming scarcer.

From when does the ban apply to T8 tubes?

The RoHS exemption for standard T5 and T8 fluorescent lamps expired on 24 August 2023 (Delegated Directive (EU) 2022/284). Since then, these lamps may no longer be placed on the EU market.

Is an LED tube enough to comply with Section 56?

No. Section 56(6) GModG requires automatic lighting control, not new light sources. An LED tube lowers consumption but does not replace presence or daylight control.

Can LED retrofit tubes be dimmed?

Usually not, or only to a limited extent. For presence and daylight control with dimming, you need LED luminaires or LED modules with a dimmable driver, such as DALI or 0-10 V.

How do I dispose of old fluorescent lamps?

Separately, via collection points for waste electrical equipment, not with general waste. The lamps contain mercury and should be handed in unbroken.

Last reviewed: 18 November 2026. General information, not legal advice. The legal text is authoritative.

Getting started

From your question to a finished plan.

Free initial consultation, one contact person.

Send a photo of the driver labelWe check free of charge whether your luminaires can be retrofitted.
Add your floor planWe turn it into a 3D model with sensors and zones.
Planning and quoteYou see the result in 3D first, then you decide.