
Offices & rooms
IFS105SE
Round Indoor Sensor for LLLC. Luminaire sensor for offices and corridors. Every luminaire becomes its own presence detector with daylight control.
- Installation in 1/2-inch knockout in the luminaire housing, ceiling mounting with RC02
- Bluetooth mesh networking technology
- For mounting heights up to approx. 5.5 m
- AlgoH2 algorithm
- Integrated analogue PIR sensor
- 12 V DC input
- Daylight harvesting
Technical data
| Input voltage | 12 V DC |
|---|---|
| Wireless | Bluetooth 5.0 (BLE up to 30 m), 2.4 GHz |
| Sensing | PIR + daylight |
| Mounting height | up to 5.5 m (18 ft) |
| Temperature range | −30 °C to 55 °C |
| Ingress protection | IP20 |
| Housing | Flame-retardant plastic (class 5VA), white |
| Standards | CE, RoHS (EU Directive 2011/65/EU) |
| Dimming output | 0-10 V (Class 2), max. 10 mA; B2: 2× 0-10 V (CCT) |
| Driver requirement | Dim-to-off LED driver with 12 V AUX output |
| Detection range | up to 12 m (40 ft) |
| Lens | LBL2 (included) |
| Installation | 1/2-inch knockout in the luminaire housing; ceiling installation with RC02 |
| Cables | DC30/DC60/DC120 (PH2.0 to tinned ends) |
Where we use it
In offices, corridors and ancillary areas: a sensor in each luminaire, zones via app. That creates finely zoned control as § 56 provides for as a rule.
Typical applications: Private and open-plan offices, Hallways and corridors, Classrooms, Meeting rooms, Healthcare / patient rooms
Manufacturer data. Which components make sense in your building is decided in the 3D planning. Occupancy detection, zoning and monitoring are included with every sensor.
Getting started
From your question to a finished plan.
Free initial consultation, one contact person.
Send a photo of the driver labelWe check free of charge whether your luminaires can be retrofitted.
Add your floor planWe turn it into a 3D model with sensors and zones.
Planning and quoteYou see the result in 3D first, then you decide.